What are SCSI IDs expected by Solaris x86?
These are the typical values for SCSI devices. For tape and CD-ROM, theseare the defaults used in the /etc/vold.conf file for controlling the vold
mounter. You can set them to other ID's but remember to adjust the
vold.conf file to the new values.
Boot drive ID 0
Second drive ID 1
Third drive ID 2
Reserved by Solaris ID 3
Tape ID 4
CDROM ID 6
SCSI controller ID 7
[From Bob Palowoda's Solaris 2.4 x86 FAQ]
Home | FAQ |