ASGAUR

M-Series M-Series (Mcdata) switches uses both web and CLI, the table below displays some but not all the CLI commands. commadelim Toggle comma-demlimited display mode config configure settings login login into CLI with different acc… more »

Step by Step Procedure of Zoning via Cli. 1.Create a Zone Alias using "AliCreate" SW0:admin> alicreate "SUNX4150_HBA0" 2.Add member to Alias using "Aliadd" SW0:admin> aliadd "SUNX4150_HBA0","21:00:00:1b:32:13:a8:9f" 3.Create a Zone using "Z… more »

1. Check the new installed HBA. Run the AIX Advanced Diagnostics using the Problem Determination Mode against the Fibre Channel Adapter. While the test is running, you will be prompted to plug or unplug the fibre cable or the wrap plug to or from the co… more »

Solaris Useful commands at OK prompt. Dignostics: boot General banner this command shows the following systems hardware informatiion : Model,architecture, processor,keyboard… more »