ASGAUR

New Installation 1. If a boot device has already been assigned and discovered by the host via the internal installation of AIX, skip to step 3. 2. After the boot device has been assigned to the host, you must discover the boot device. To d… more »

Configuring the Emulex HBA BIOS to boot from SAN includes enabling the BootBIOS prompt and enabling BIOS. A.  Enable the BootBIOS Prompt When you configure the Emulex HBA BIOS to boot ESX/ESXi from SAN, you need to enable the BootBIOS prompt. Proce… more »

In order to successfully move LUNs to a new host, these general steps must be taken.All physical volumes (which relate to a physical LUN) within a volume group must be moved as a group.First backup your /etc/lvmtab and the /etc/fstab files.Under HP-UX on… more »

Physical Container-Front End Ports Speedsnaviseccli –h 10.1.50.131 port –list -sfpstatenaviseccli –h 10.1.50.131 –set sp a –portid 0 2naviseccli –h 10.1.50.131 backendbus –get –speeds 0SP Reboot and Shutdown GUInaviseccli –h 10.1.50.131 rebootspnaviseccl… more »

The following is an example of increasing the size of a Storage LUN that has an ext3 file system on it. When performing operations like this, perform a backup of the file system first. (The system used for this example is running Red Hat Enterprise L… more »