ASGAUR

If a USB device behaves erratically. Use the cfgadm command to reset the device, which logically removes and re-creates the device. 1. Become superuser. 2. Make sure that the device is not in use. 3. Reset the device. Fo… more »

This document shows how you can set up a two node, high-availability HTTP cluster with heartbeat on linux. Both nodes use the Apache web server to serve the same content. Pre-Configuration Requirements: 1. Assign hostname host01 to primary node… more »

This procedure lets you verify the baud rate and other serial port settings used by the Sun Fire V490 server to communicate with attached serial port devices. You must be logged in to the Sun Fire V490 server, and the server must be running Solaris O… more »

Ways of Accessing the ok Prompt Access Method What to Do Graceful halt From a console window (dtterm, for example), issue an appropriate command (for example, the shutdown,init, halt, or uadmin command)… more »

The following procedure assumes you are connecting to the serial port (ttya) of the Sun Fire V490 system using a tip connection from serial port B (ttyb) of another Sun server, and that the other Sun server has its own local graphics terminal. Proced… more »